i-Crafter: Birthday in Boston USA Rosette Layout

Hello friends! Today I have a Birthday in Boston Layout featuring the Ribbon Rosette Die Set. It documents a trip I took with my husband to Boston, an iconic American city, and how appropriate as we approach America's birthday! 

This is my second guest design project for i-Crafter this month! Did you see my first project with the Thanks Foiled Rainbow Box Tutorial?

A few years back, my husband took me to Boston on a combination trip of business and (my) birthday. I love Boston for its rich history with modern vibe. We stayed at the Langham Hotel which was the former Federal Reserve Bank of Boston renovated - SO COOL! We covered a lot of ground in the 48 hours we were there.

**I receive products from i-Crafter and Scrapbook Adhesives by 3L® for use in my projects. The opinions are completely my own based on my experience and doing so I can share what I personally love to use.**

Rosette Construction

I grabbed red, white, and blue cardstock to cut one set of three strips for each color from the pre-scored strip die in the Ribbon Rosette. When creasing the lines, start with the end that has the larger scored section (the other end has a narrow scored section - think tab) and mountain-fold. Next valley-fold and accordion-fold till the very end where it ends in a mountain-fold.

Showing the white strips below where the tab end is, I applied a piece of Extreme Double-Sided Tape 1/8in. (red-lined tape) - do this to all three strips. Adhere the ends together (tab section underneath the next strip) to make one long strip, and then finally both ends together to create a pleated ring.

Close the ring together by making the center opening smaller and secure it with a circle cut with a circle die from the Ribbon Rosette set and 3D Foam Creative Sheet. LOVE how it turned out!! Repeat with the red and blue cardstock strips.

Embellish the Rosettes

With some silver mirror cardstock, I die-cut three times with the decorative edge circle die from the Ribbon Rosette set. Again, die-cut the circle from the same set with 3D Foam Creative Sheets, and adhere one to each of the decorative edge circles.

I had a set of USA-themed stickers in my stash and realized they had gold accents - OOPS! But I've got a solution - why not combine them?! I nested the circle and Happy Birthday circle from the Ribbon Rosette set to cut a Happy Birthday sentiment circle with a gold mirror cardstock. To pop it up, I cut the leftover 3D Creative Foam Sheet and centered it onto the decorative edge circle.

Taking advantage of the other sentiment circles, I die-cut them in gold mirror cardstock and spelled them out to IN BOSTON for the white rosette. Since they're so tiny, I used adhesive sheets to adhere - so easy! For the last rosette, I added the USA banner from the sticker sheet.

Birthday in Boston Layout

The patterned papers I used I had for years because I loved them so much. Do you have this same issue? LOL! Today, I will use some to create my page.

On a blue 12 x 12 patterned paper, I placed two of my favorite pictures. One is of the Old State House where the Declaration of Independence was read to the public from the baloney shown. The other is of my husband, business friend/Japanese pro soccer player, Keisuke Honda, and me. We all are summer birthday babes. This was taken at a business function but we celebrated! LOL!

Using coordinating patterned papers, I cut 1-inch width strips and then die-cut the ends with the larger ribbon tail die from the Ribbon Rosette set. Excused the well-loved cutting mat pictured - LOL! I cut three strips and place them under the pictures. The rosettes acted as guides to help place the strips.

Lastly, I clustered all the rosettes right below the birthday picture with the leftover 3D Foam Creative Sheet in single layers and also stack a few pieces to bring height over the other rosettes.

Designer's Note: If you find that you do not want your journal to be seen, tuck your journal BEHIND the page so you can only see it or adhere an envelope with your journaling tucked inside.

I hope you enjoyed this Happy Birthday in Boston USA scrapbook layout tutorial. Would love it if you follow me on my ILscraps Instagram! Have a wonderful day!

Thanks for stopping by!
MargieH

Skill Level: Intermediate
Creative Time: 40 minutes

Materials Needed:
Craft Dies: i-Crafter (Ribbon Rosette)
Patterned Papers: PhotoPlay Paper Co. (Main Street Parade Collection by Samantha Walker - retired)
Adhesives: Scrapbook Adhesives by 3L® (Extreme Double-Sided Tape 1/8in., E-Z Runner® Ultra Strong, Adhesive Sheets 4 x 6in, 3D Foam Creative Sheets Small)
Dimensional Stickers: EK Success (Jolee's Boutique/American Flag)
Other: Silver Mirror, Gold Mirror, Red, Blue and White Cardstock; Scissors; Crease Tool; Manual Die-Cutting Machine

Save to Pinterest!

i-Crafter: Thanks Foiled Rainbow Box Tutorial

Hello friends! Today I have something special to share. I am guest designing for i-Crafter this month! So thrilled and honor to be asked :) Thank you to Niccole and i-Crafter for letting me play!

Do you love rainbows? It brings a smile every time I spot one. When I saw this Stitched Rainbow die set from i-Crafter...oh, the possibilities of all the projects I can create with this one set! Instead of a card, I created a 5 x 7-inch box to add a thank you gift for a friend. It has lots of texture, shine, and dimension! Let me show you how to create this!

**I receive products from i-Crafter and Scrapbook Adhesives by 3L® for use in my projects. The opinions are completely my own based on my experience and doing so I can share what I personally love to use.**

Foil Rainbow Accent

For a dimensional rainbow, I used a sheet of 3D Foam Creative Sheet Medium 6 x 12-inch and die-cut the rainbows from the Stitched Rainbow die set. Note: the foam sheet is thick. Just to make sure, I cut it through my die-cutting machine two to three times.

Leaving the opening pieces in, I remove the liners and apply three colors of Metallic Transfer Foil onto the exposed adhesives (color facing UP). Simply rub the foil to transfer the colors. Missed a spot? No problem, just reapply the foil over the missed areas.

The silver foiled rainbow needed something...pearls go with anything! There was a sheet of white self-adhesive pearls in my stash and I randomly added the smallest ones. Loved how they turned out! Set the rainbows aside and let's work on the box.

Rainbow Box Base

After searching online for a 5 x 7-inch box, I choose a combination of ideas to create one. If you are interested, do a search of your own for yours. Using the E-Z Runner Ultra Strong, I assembled the base.

Next, cut two front box panels to embellish, leaving a 1/8-inch border around each panel. Cut the Silver Mirror cardstock to 5 1/8 x 7 1/8-inches, and the Kraft cardstock to 5 x 7-inches.

For a bit of interest, I embossed the Kraft panel with a dotted embossing folder. Using the E-Z Runner Ultra, adhere both panels on the box front. 

Embellishments

For the bottom ends of the rainbow, I hand drew and cut three different sizes of clouds. Edge with ink for definition and set aside. Using the same silver mirror cardstock, I die-cut thanks from the Stitched Rainbow die set.

Box Front

To finish off, adhere the rainbows to the box front by removing the liners first and add them in size order. 

Place the two smaller clouds on the left end of the rainbow with the E-Z Runner Ultra. The large cloud on the right end with the 3D Foam Strips White. Lastly, the sentiment is added on top of the large cloud with E-Z Runner Petite Permanent Dots.

Add your gift, close the hinge and it's ready to give!

I hope you enjoyed this Foil Rainbow Thanks Box tutorial. Would love it if you follow me on the blog or my ILscraps Instagram! Have a wonderful day!

Thanks for stopping by!
MargieH

Skill Level: Intermediate
Creative Time: 30 minutes

Materials Needed:
Craft Dies: i-Crafter (Stitched Rainbow)
Adhesives: Scrapbook Adhesives by 3L® (E-Z Runner® Ultra Strong, E-Z Runner® Petite Permanent Dots, 3D Foam Strips, 3D Foam Creative Sheets Medium 6 x 12in.)
Ink and Applicator: Ranger Ink (Distress Ink in Antique Linen)
Other: Silver Mirror, Kraft and White Cardstock; Scissors; Score Board/Crease Tool, Manual Die-Cutting Machine; White Self-Adhesive Pearls

Save to Pinterest!

Hi Kokeshi Girl Card

A few weeks ago, I purchased a bunch of items from i-Crafter because the collection was full of Japanese designs. You may recall I created a family scrapbook page using their Wisteria Vines die. See Wisteria Vines Family Photo Layout post. Also in my basket were the Kokeshi Dress Up die set and the Japanese Kumiko Stencil. {{BIG GRIN}}

**I receive products from Scrapbook Adhesives by 3L® for use in my projects. The opinions are completely my own based on my experience and doing so I can share what I personally love to use.**

Using a mixed media piece from another project, I used brown ink and the Japanse Kumiko Stencil to randomly add the design to it. I inked the edges to finish and set it aside.

Let's start with the kimono pieces, I first applied Adhesive Sheets to the back of each patterned paper before die-cutting. It makes it so much easier to assemble and no messy liquid glue to seep out (think stickers).

Ink the edges of the kimono pieces with the same brown ink to give it definition.

Next die-cut the girl in ivory cardstock. I love that the design has embossed areas to add different parts like the collar, eyes, and zori straps.

Take off the liners from the kimono pieces and assemble the girl. For the sleeves, I pop them up with 3D Foam Strips. 

Before die-cutting the hair, eyes, and zori sandal straps, I applied Adhesive Sheets to the back of the black cardstock. I later die-cut her feet in white cardstock.

After die-cutting the letters HI, I assembled all the pieces on the card panel (aka stenciled mixed media piece). I only wanted a subtle dimension for the panel so I used the Crafty Foam Tape 108ft because it had a depth of 1mm (like a Thin 3D Foam Square) to attach to my black A2 size card base. Done!

I hope you enjoyed this card. Would love it if you follow me on the blog or my ILscraps Instagram! Have a wonderful day!

Thanks for stopping by!
MargieH

Skill Level: Intermediate
Creative Time: 30 minutes

Materials Needed:
Patterned Paper: Spellbinders® Paper Arts (Express Yourself Paper Pad)
Craft Dies: i-crafter (Kokeshi Dress Up and Japanese Kumiko Stencil); Memory Box (Vintage Varsity Alphabet)
Ink and Applicator: Ranger Ink (Distress Ink in Gathered Twigs)
Adhesives: Scrapbook Adhesives by 3L® (E-Z Runner® Grand Permanent Dots, Crafty Foam Tape 108ft, 3D Foam Strips, and Adhesive Sheets 6 x 12in.)
Other: Black, White and Ivory Cardstock; Scissors; Manual Die-Cutting Machine; Blending Brush

Pin It!

Wisteria Vintage Family Photo Layout

Hi, friends! I wanted to share a photo of my father when he was a toddler back in the late 1920s. It is the only photo I have of him at that age so it is a precious keepsake.

I came across a Wisteria die that i-crafter introduced a few weeks ago. Wisteria in Japanese is known as the Fuji (藤) flower. My maiden name is FUJIi (藤井). So when I saw this design, I knew I had to have it. LOL! 

**I receive products from Scrapbook Adhesives by 3L® for use in my projects. The opinions are completely my own based on my experience and doing so I can share what I personally love to use.**

Wisteria Vintage Family Layout

Grab a couple of 12 x 12-inch sheets of dark purple cardstock to cut four Wisteria Vines designs. One was kept in tack (this is a perfect size for a slimline card front btw) - apply Adhesive Sheet 6 x 12-inch on the back before die-cutting for an edge-to-edge adhesive coverage (think sticker).

The other three Wisteria designs, I fussy cut the frame and some of the leaves out to create hanging flower vines. This die cuts so well! Love it!

For one of the purple cardstock, I cut 3 5/8 x 8.5-inch rectangle around the cut area to make a mat to frame the 3.25 x 8.25-inch navy rectangle.

Layer all of the rectangle mats with the E-Z Runner® Grand Permanent Strips for a stunning focal accent on the layout. The best part? You don't waste the cut up purple cardstock!

Then lastly, center and adhere the Wisteria die cut shape by peeling off the Adhesive Sheet liner in the back. Set aside.

To create a border, I layered a strip of 4.25 x 12-inch purple patterned paper on top of a strip of 4 5/8 x 12-inch navy cardstock with E-Z Runner® Grand Permanent Dots.

Using the same adhesive, I applied the adhesives on the back of two Wisteria vines to adhere on the top and bottom of the border. Trim off excess. I love how the adhesive hits only the design so easy to apply!

Add all the other patterned paper pieces, layered border, double-mat the photo and add another Wisteria Vine behind it. Then add the layered border last.

The finishing touch are the leaves in the upper right corner. In the back of the layout, I'll add my journaling in the back so it doesn't distract from the layout design.

I hope you enjoyed this Wisteria Vintage Family Layout. Would love it if you follow me on the blog or my ILscraps Instagram! Have a wonderful day!

Thanks for stopping by!
MargieH

Skill Level: Intermediate
Creative Time: 40 minutes

Materials Needed:
Patterned Paper: DCWV (Zodiac Premium Stack® Paper Pad)
Craft Dies: i-crafter (Wisteria Vines Die Set)
Adhesives: Scrapbook Adhesives by 3L® (E-Z Runner® Grand Permanent Strips, E-Z Runner® Grand Permanent Dots, Crafty Foam Tape 108ft, and Adhesive Sheets 6 x 12in.)
Other: Navy and Dark Purple Cardstock; Scissors; Manual Die-Cutting Machine

Pin It!