Friday, December 16, 2016

Scrapbook Adhesives by 3L & Bo Bunny Blog Hop - Day 5: Winter Joy Shaker Tag Tutorial

Hello! I'm back participating in Scrapbook Adhesives by 3L® Blog Hop with Bo Bunny - Day 5! There's a chance to giveaways :) This time I am sharing a shaker banner tag called Winter Joy...you can add a white cord in the back to use as an ornament or a gift tag.


I cut/embossed a ribbon tail banner twice in two different patterned papers from the Winter Wishes Collection from Bo Bunny Designs. On the beautiful Winter Wishes paper (the darker paper), I cut a rectangular window to show my shaker feature.


Using my sequin stash, I added them in to the Keepsake Envelopes Mix medium envelope and sealed the opening by taking off the small white liner to press the flap down.


Remove the liner from the back of envelope. To determine its placement, I used the window tag as a guide. In the back of the window tag, I applied Crafty Foam Tape White to the edges - keep the top liner on for now.


Now to embellish the window tag, I used a combination of Winter Wishes Combo Sticker Sheet, Winter Wishes Noteworthy Pack and Double Dot Jewels. Each piece (except the sticker on the upper left corner) was secured with Crafty Foam Tape White to give dimension and interested.


After the embellished window tag was done, take off the liner in the back and place on top of the shaker tag to create one piece. I folded the organza ribbon from the Texture Ribbon set in half, wrapped around the tag and tied a bow. (Tip: I secured the back of the bow with Dodz Adhesive Dots Small.). Here's another look...




Supplies List
Scrapbook Adhesives by 3L®:

Crafty Foam Tape White
Keepsake Envelopes Mix
Dodz Adhesive Dots Small
Donna Salazar with Scrapbook Adhesives by 3L®:
Texture Ribbons
Bo Bunny Press:
Winter Wishes Collection
Winter Wishes Combo Sticker Sheet
Winter Wishes Noteworthy Pack
Double Dot Jewels
Other:
Dies (Spellbinders® Creative Arts - A2 Matting Basic & Baby Bunting); Sequins

I hope you enjoyed this tutorial! Don't forget to enter for giveaways - last day! Good Luck!
MargieH

Tuesday, December 13, 2016

Scrapbook Adhesives by 3L & Bo Bunny Blog Hop - Day 2: Let It Snow Hot Cocoa Pocket Card Tutorial

Today I am participating in Scrapbook Adhesives by 3L® Blog Hop with Bo Bunny - Day 2!! It is also National Hot Cocoa Day so my pocket card is perfect for the occasion :) It's a "Let It Snow" pocket card with hot cocoa mix! LOL!


This is what it looks like inside...


I started with a 12 x 6" Magic patterned paper from Bo Bunny's Winter Wishes Collection to scored at 4" and 8" to create my card base. Then cut a diagonal for my pocket feature.


Tip: Not to waste the cut piece, I adhered it to the middle panel (using the pocket as a guide to align) with E-Z Runner® Ultra Refillable Dispenser. Then adhere the pocket by applying the E-Z Runner Ultra from left open side to the bottom edge.


For embellishments, I used Bo Bunny's Noteworthy pack which is full of wonderful assortment of die cuts so no fussy cutting for this gal! I used these below...


I wanted to use an open frame for my card front so I cut the picture inside. Set aside for later use.



I wanted to "pop up" my die cuts so I used a combination of 3D Foam Squares - White, Regular and 3D Foam Squares - Black, Small. These give the die cuts great dimension to my card front.


Tip: never waste any cut out pieces! I used the picture from the picture frame die cut and adhered it inside my card with Creative Photo Corners - Silver.


Just add hot cocoa mix and it's ready to be given away! Here's another look...



Supplies List
Scrapbook Adhesives by 3L®:

E-Z Runner® Ultra Refillable Dispenser
3D Foam Squares - White, Regular
3D Foam Squares - Black, Small
Creative Photo Corners - Silver
Bo Bunny Press:
Winter Wishes Collection
Winter Wishes Noteworthy Pack
Other:
Hot Cocoa Mix

I hope you enjoyed this tutorial! Don't forget to enter for giveaways! Good Luck!
MargieH