Monday, August 05, 2019

Rita Barakat Designs: Mermaid To Be Friends Scrapbook Page with Aladine

CONTEST HAS ENDED - THANKS FOR PARTICIPATING! 
CONGRATS TO THE WINNER!

This month I am participating with Rita Barakat Designs and Aladine Creations in a fun blog hop featuring Mermaid Tails Die Cuts and Kiss of the Fairy Embossing Powder with different color and texture products from Aladine to make a scrapbook page!


**I receive products from Rita Barakat Designs, Aladine Creations, Spellbinders® Paper Arts, and Scrapbook Adhesives by 3L® for use in my projects. The opinions are completely my own based on my experience and doing so I can share what I personally love to use.**


Mermaid To Be Friends Scrapbook Page Instructions

On a piece of 8.5 x 11-inch white cardstock, I randomly sprayed Menthe, Rosee, and Aurore Izink Dye Sprays.


How do you use leftover foam adhesive sheets? I used them as an embellishment! Simply cut into desired strips, remove the bottom liner to place on the page and then remove the top liner to sprinkle the Kiss of the Fairy Embossing Powder on top. Make sure to press down the powder with your fingers to secure and tap off excess. Melt with a heating tool.




Want to bring more fun texture to your background? Take Japanese Duo Geometric DIY Stencil and spread White Pearl Izink 3D Texture Paste over it (the wave design) for an amazing pearly design. Note: use E-Z Dots Repositionable adhesive to secure your stencil to your paper. When done, just rub off the dots!


While the texture paste dries, I wanted to add washi tape element but to also match the yellow color from the Aurore Izink Dye Spray. I had the same color in their Izink Dye Ink Pad category so I took pieces of paper tape and placed on my craft mat. Next, I swiped the Aurore Izink Dye Ink Pad over the pieces and let it sit overnight.


It was still wet so I wipe off the excess with a paper towel to reveal a beautiful colored washi tape! I cut each strip in half and put one piece over the other for more vibrant color on two opposite sides of the paper.


After looking over my background, I noticed a need for a pop of color. So I grabbed the Topaz Izink 3D Texture Paste and spread it on top of the Japanese Duo Geometric DIY Stencil (the dot + line design) in three areas of the paper. What do you think?



Playing with the Topaz Izink 3D Texture Paste further, I made a skin by spreading the paste on a non-stick craft sheet and letting it dry. Then I spread another layer and let it dry. Dry time varies depending on where you live. I did the first layer and went to make dinner. The second layer, I did and then left overnight.

At the same time, I cover with a thin coat on a piece of white cardstock using the Topaz Izink 3D Texture Paste.


After it dried, I die-cut the paper with the word "mermaid" in my manual die-cutting machine. Note: use wax or parchment paper to get a clean cut.


With the skin, I covered another piece of white cardstock using a strong adhesive like the E-Z Runner Ultra Strong adhesive. This layer will be one of many to be used behind my picture.


For more layers behind the picture, spray and cover the entire piece of white cardstock with Rosee Izink Dye Spray. Take another piece of white cardstock and stay with Aurore Izink Dye Spray. Let dry.



For an accent on top of the page, I decided to do a mermaid tail. So I covered a thin coat on a piece of white cardstock using the Topaz Izink 3D Texture Paste and let dry. Next, I stamped a mermaid tail with Cerise Izink Dye Ink Pad and used its coordinating die to cut the shape. Trim the top for a straight edge.


Afterward, wind natural twine twice around the tail, secure it with the Adhesive Dots Mini.


Then adhere with the E-Z Runner Ultra and place on the top left edge of the scrapbook page.


Adhere the colored layers behind the picture with the E-Z Runner Ultra and secure it to the page. The Mermaid Die Cut is secured with 3D Foam Circle and the E-Z Runner Ultra.



For the title background, I die-cut two mermaid tails in white cardstock and sprayed with Aurore Izink Dye Spray. Let dry. Then I inked edges both die cuts with the Aurore Izink Dye Ink Pad.


I wanted to make sure the die cuts didn't shift while stamping part of the title so I adhered them together with the E-Z Runner Ultra. Note I made one shorter than the other for balance.


Using two different stamp sets, I masked off the words I needed "to be" and "friends." I placed my mermaid tails into the MISTI and stamped my sentiment with Mer du sud Izink Dye Ink Pad.




Use more leftover 3D Foam Circles to place the mermaid tail die cuts to the bottom left edge of the page. Make sure to trim excess.


Apply E-Z Runner Grand with the E-Z Grand Dots Permanent Refill on the back of the "Mermaid" die cut and place across the mermaid tail. Add pearls randomly around the page, I used five for the girls in the photo!


Here's the finished page!


Thanks for stopping by!
MargieH

Creative Time: 45 minutes
Skill Level: Advance

Materials Needed
Rita Barakat Designs

Mermaid Tails Die Cuts
Kiss of the Fairy Embossing Powder

Aladine Creations
Menthe, Rosee, and Aurore Izink Dye Sprays
Japanese Duo Geometric DIY Stencil
White Pearl Izink 3D Texture Paste
Aurore Izink Dye Ink Pad
Topaz Izink 3D Texture Paste
Cerise Izink Dye Ink Pad
Mer du sud Izink Dye Ink Pad

Other
Etched Dies: Spellbinders Paper Arts (Mermaid Tail Swatch Stamp and Die Set); Stamps: Spellbinders Paper Arts (Mermaid Tail Swatch Stamp) and My Favorite Things (BB Polar Bear Pals and LLD Sweet Succulents); Stamp Positioning Tool: My Sweet Petunia (MISTI); Pearls: Want2Scrap (250 Ct. Pearls White); Adhesives: Scrapbook Adhesives by 3L (E-Z Runner Ultra, E-Z Dots Repositionable, E-Z Runner Grand, E-Z Runner Grand Dots Permanent, 3D Foam Circles in Black Regular and Adhesive Dots Mini); Heating Tool; Natural Twine

Pin It!


Giveaway Details

To enter the giveaway, simply do THREE THINGS:

  1. Visit all the participating designer blogs (list below) and leave a comment on each.
  2. Follow Aladine FaceBook Page.
  3. Sign Up for Rita's Newsletter.


Rita will announce the winner during her August 12th Mixed Media Monday at 8PM Central Time on her Rita Barakat FaceBook Page. Make sure to join her page to view. Good Luck!

Your next stop is Yolie Burke.

Visit and be inspired by participating designers:

Margie Higuchi (You are Here!)
Yolie Burke

CONNECT WITH US!










15 comments:

sharon g said...

The 3D texture paste adds so much! I really love the mermaid, and the tails. Really I love everything. You are very inventive--using the left over pieces from the foam adhesive is a great idea. THANKS

Verna Angerhofer said...

Wonderful mixed media scrap page design.

Jessica K said...

You sure showcased these products well - WOW! Now I want them ALL! Sooo gorgeous - and I love how bright and FUN this page is!

Jean said...

Such a wonderful layout! Love the textures, colors and shine! Thank you for the inspiration!

Michelle Wells INSPIRE said...

This is AWESOME! Love all the elements of texture you chose!!!!

Janet Trieschman said...

I love that you die cut the 3D texture paste, I need to try that

Texas MaryG said...

Thanks for all the cool ideas. Never thought of embossing my foam tape dots.

Scribble and create with Chris said...

Very nice page! Love all the color💖

mikosspot.blogspot.com said...

Your layout is marvelous! Thanks for showin such a detailed how to instructions!

cghundley said...

Darling page and I
love all the texture
and colors. Great
looking creation.
Carla from Utah

Renee said...

Margie, I absolutely love your project. From your design to the colors that really pop, your creation delights in every way! Thank you so much for sharing!!

Donna said...

I just fell hand over foot in love with that texture paint! Great idea using the pop dot left overs!!! Thanks for sharing!

Andre M. said...

So many fab crafty nuggets in this post! So creative to make your own washi, and the result is just gorgeous. Thanks for sharing your creativity with these products.

Rita Barakat said...

Well done Margie! Your project pics really show the vibrant Aladine colors and textures!

Angela T said...

My favorite thing is that you used the ink to dye that paper tape! It turned out so good and is such a neat idea!