InkyStamper: Fall Thank You Wreath Card

Hello Paper Crafters and Happy (early) Thanksgiving! I am sharing a fun interactive card today featuring a combination of stamp sets:  the Owl Stamp and Die Set, Market Tote Stamp and Die Set, and Cow Stamp and Die Set from Inky Stamper!AND it's an interactive card with the Like to Move It Dies and Clear Move Its Set. :) 

**I receive products from InkyStamper and Scrapbook Adhesives by 3L® for use in my projects. The opinions are completely my own based on my experience and doing so I can share what I personally love to use.**

Creating the Card Front Layers

Cut three square card panels: brown patterned paper to 5.50-inches and plaid patterned paper to 5-inches, and cardstock to 4.75-inches.

Apply Premium Double-Sided Tape 1/4in. on all four sides of the 4.75-inches cardstock square. Remove top liner. Place a piece of Metallic Transfer Foil in Silver Holographic (color side UP) and rub gently with fingertips to transfer the color and peel off. If you miss a spot, reapply with foil. Set aside the layers to work on the wreath.

Wreath Making

To make a base, die-cut two circles nested together with cardstock to create a thin ring. Place on a piece of wax paper. With a sheet of Creative Photo Corners in Silver, cut them into strips by cutting the black inner liner.

Apply one on top of the ring with the point of a second photo corner tucked into the first. Repeat this until you go around to the other end, following the ring.

Take the same two circle dies, nest them together, and die-cut with a sheet of 3D Foam Creative Sheet. Place the ring shape on top of the photo corner wreath.

Remove the top liner and place a piece of Metallic Transfer Foil in Silver Holographic on top (color side UP). Rub gently with fingertips to transfer the color and peel off. If you miss a spot, reapply with foil.

Remove the embellished wreath from the wax paper and center it on a 4.5-inch brown patterned paper panel. Then adhere to the foil edge cardstock panel.

Die-cut the round shape from the Like to Move It Dies in the center of the wreath panel.

Adhere the brown and plaid patterned panels together with the E-Z Runner Ultra Strong.

Add Crafty Foam Tape to lift the wreath panel and then snap in a Clear Move It in the opening before adhering to the layered panels. Set aside to stamp, die-cut, or color images.

Stamping Elements

Stamp the leaf from the Owl Stamp and Die Set in black ink on different fall color cardstock. Then die-cut its coordinating die.

Stamp the bouquet from the Market Tote Stamp and Die Set in black ink on white cardstock. Then fussy cut the shape and watercolor the flowers. Set aside to dry.

Stamp the sentiment from the Cow Stamp and Die Set in black in on white vellum. Cut into a strip with a ribbon tail on the right end.

Embellishing the Card Front

Using Adhesive Dots Medium, place the leaves on the wreath.

For the sentiment strip, I adhered with E-Z Runner Permanent Fine (vellum adhesive).

Secure the flowers in the center where the Clear Move It is with an Adhesive Dot Medium. Add the card panel to a white 5.5-inch square card base to finish!

Take a look at this short video to see it twirl!

I hope you enjoyed this tutorial. Would love it if you follow me on the blog or my ILscraps Instagram! Wishing you and your family a safe Thanksgiving!

Thanks for stopping by!
MargieH

Skill Level: Intermediate
Creative Time: 30 minutes

Materials Needed:
Stamps and Craft Dies: InkyStamper (Owl Stamp and Die Set, Market Tote Stamp and Die Set, Cow Stamp and Die Set, Like to Move It Dies and Clear Move Its Set)
Black Ink: Tonic Studio (Nuvo Hybrid Ink in Black Shadow)
Patterned Papers: PhotoPlay Paper Co. (Gnome for the Holiday Thanksgiving Collection)
Adhesives: Scrapbook Adhesives by 3L (E-Z Runner Ultra Strong, E-Z Runner Permanent Fine, Crafty Foam Tape, Adhesive Dots Medium, Creative Photo Corners in Silver and Metallic Transfer Foil Sheets in Holographic)
Other: Scoreboard and Tool; White Cardstock; Acrylic Block; Scissors; Manual Die-Cutting Machine

Pin It!

InkyStamper: Had Me at Hot Chocolate Card

Hello Paper Crafters! I am sharing a unique interactive card today featuring the NEW Snowman Stamp and Die Set from Inky Stamper!

**I receive products from InkyStamper and Scrapbook Adhesives by 3L® for use in my projects. The opinions are completely my own based on my experience and doing so I can share what I personally love to use.**

Making the Card Base

To make a pocket card, I will use a piece of 12 x 5.5-inch light green cardstock. On the long side (12-inch), scored at 4-inch and 8-inch. This will give you three panels to work with. Fold the scored lines and cut the last panel in a diagonal as shown in the picture below.

Apply E-Z Runner Micro to the right edge and bottom edge of the diagonal panel. Then fold over to the second panel and burnish the adhesive area with a bone folder to secure. Set aside to work on the card panels.

Creating the Card Front

Cut two card panels: red patterned paper to 3.5 x 5-inches and green patterned paper to 3.75 x 5.25-inches. Adhere the green patterned paper to the card base.

Next, stamp four snowflakes and mugs from the Snowman Stamp and Die Set. Die-cut the snowflakes with its matching die and fussy cut the mugs.

Stamp the sentiment with black ink on white cardstock and cut a strip with a fishtail end. Using the strip as a guide, cut a slightly larger strip with the same green patterned paper as the panel. Adhere together.

Using the stamped images and layered sentiment strip as guides, determine placement on the red card panel. Behind the stamped images, die-cut circles using the circle dies from the Like to Move It Die Set.

Snap the Clear Move-Its in all the circles. Then in between the gaps, add in two layers of Crafty Foam Tape Black. You don't have to use as much as I did but I wanted mine solid. LOL!

I LOVE the Clear Move-Its! They coordinate with the Like to Move It Die Set to move in place to sliding back 'n forth, depending on how your die-cut the track.

To finish off, center the card panel on top of the card base. Adhere the stamped images on top of the Clear Move-Its with Adhesive Dots Small and add a clear rhinestone in the middle. Then pop up the mug next to the sentiment.

For the inside, I covered with patterned paper on the pocket, foiled a 3D Foam Snowflake and added a snowflake stamped image with a clear rhinestone.

On the other side, I add a matted message area accented with four Creative Photo Corners in Silver and stamped a sentiment from the Snowman Stamp and Die Set.

Would love it if you follow me on the blog or my ILscraps Instagram!

Thanks for stopping by!
MargieH

Skill Level: Intermediate
Creative Time: 30 minutes

Materials Needed:
Stamps and Craft Dies: InkyStamper (Snowman Stamp and Die Set, Clear Move-Its, and Like to Move It Die Set)
Black Ink: Tonic Studio (Nuvo Hybrid Ink in Black Shadow)
Patterned Papers: Authentique Paper (Joyous Collection)
Adhesives: Scrapbook Adhesives by 3L (E-Z Runner Micro, 3D Foam Holiday Embellishment Kit with Foil, Adhesive Dots Small, Creative Photo Corners in Silver and Crafty Foam Tape in Black)
Other: Scoreboard and Tool; Lt. Green and White Cardstock; Acrylic Block; Scissors; Manual Die-Cutting Machine; Clear Rhinestones

Pin It!