Monday, September 25, 2017

Scrapbook Adhesives by 3L + Lawn Fawn Blog Hop: Joy to the Woods Shaker Card

Today I'm up on the Scrapbook Adhesives by 3L Blog for their blog hop with Lawn Fawn. Excited to share with you all a shaker card with lots of glitter and more glitter! LOL! Using a lot of Crafty Foam Tape and 3D Foam Creative Sheets, I came up with this sweet shaker card. What do you think?

**I receive products from Scrapbook Adhesives by 3L® and Lawn Fawn® for use in my projects. The opinions are completely my own based on my experience and doing so I can share what I personally love to use :) **



Stamp on Glitter!




Trim the 3D Foam Creative Sheets to fit the Joy to the Woods Tree Dies to cut on. Then die-cut with your manual die-cutting machine. Take the top liner off and cover with white glitter. Make sure to gently rub into the sheet.



Using the Adhesive Dots Large Repositionable, place one behind the die cut to secure in place while stamping with black ink. Simply rub off after stamping. Love stamping on glitter!





Parts of the shaker.

Take another sheet of 3D Foam Creative Sheets (my frame was too big for one sheet so take another sheet and trim it down to size, using the etched dies as a guide), place on my blue glitter cardstock and trim to fit the dies.


Next, nest the two etched dies together to create an open frame with light blue glitter paper. Secure with washi tape before die-cutting into your machine. Die-cut a solid rectangle shape with patterned paper and a slightly larger solid rectangle shape with acetate.


Making Shaker Details.

Placed a USED 3D Foam Shape sheet (I used 3D Foam Snowflake) behind the patterned paper rectangle for dimension. So don't throw away your used foam sheets! Set aside.


Then place the clear acetate over the open frame and apply Crafty Foam Tape over it, make sure the corners are tight so that no loose sequins fall out.


Inside the Shaker.

Add 3D Foam Snowflake in the upper right corner of the rectangle panel and sprinkle blue glitter. Then secure a couple of the sequins with Adhesive Dots Micro so that some will not fall down to the bottom when standing up the card.



Assemble the shaker.

Add the frame (take off the liner) and place on top of the rectangle full of loose and fixed sequins. Take off liner on the back of patterned rectangle, place the shaker on top of the grey card base. Next, adhere the glittered tree die cuts on the front with stamped sentiment vellum banner applied with E-Z Runner® Permanent Fine


I hope you enjoyed the tutorial and some of the tips I shared! Have fun hopping along all week :)

Thanks for stopping by!
MargieH

Scrapbook Adhesives by 3L®:
3D Foam Creative Sheets
Crafty Foam Tape White
3D Foam Snowflake
Adhesive Dots Micro
Adhesive Dots Large Repositionable
E-Z Runner® Permanent Fine
Lawn Fawn:
Joy to the Woods Clear Stamp Set
Joy to the Woods Lawn Cuts Set
Perfectly Plaid Winter Collection Pack 6 x 6"
Holiday Sequins (retired)

4 comments:

Dana Tatar said...

Your card is so beautiful Margie! I'm not sure why I've never tried to stamp on glitter. I absolutely love the look! Thanks for the inspiration!

Marjorie DUMONTlER said...

That's a beautiful card and a great tutorial! Thanks for sharing!

Celeste Goff said...

Such a beautiful card!

Fiki said...

wonderful card