Saturday, September 01, 2018

Craft Fancy: Happy Holidays Card using Craft Fancy Exclusive Dies From Memory Box

On several occasions, I have been asked to design a make 'n take project for either a retailer or manufacturer. This card project was for a stamp consumer show in Madison, Wisconsin. The challenge (more to myself) was to use these etched dies in a unique and interesting way without being overwhelming.

This is what I came up with...a Happy Holidays Card using Craft Fancy's exclusive dies from Memory Box. When completed, you will have a layered and dimensional holiday card.

**I receive products from Craft Fancy and Scrapbook Adhesives by 3L® for use in my projects. The opinions are completely my own based on my experience and doing so I can share what I personally love to use.**

Craft Fancy: Happy Holidays Card using Craft Fancy Exclusive Dies From Memory Box by Margie Higuchi

Creating the Holiday Card Front

Use the Forest Landscape die to cut with a piece of 5 5/8 x 4" white cardstock. On the long side, place die on the top edge (making sure the tallest tree tip is just below the edge). NOTE: place wax paper between the die and cardstock for easy separation. Cut with manual die cutting machine. Remove die and flip the cardstock to repeat the same cutting steps.

Craft Fancy: Happy Holidays Card using Craft Fancy Exclusive Dies From Memory Box by Margie Higuchi

When done, it should look like the piece on the left. Cut in half to create two borders like the pieces on the right.

Craft Fancy: Happy Holidays Card using Craft Fancy Exclusive Dies From Memory Box by Margie Higuchi

Put the two borders together and shift a little to the desired look. NOTE: keep the top border steady and shift the back order. The top border will be the one showing up on the card front. Trim any harsh corner shown (think rolling slopes).

Craft Fancy: Happy Holidays Card using Craft Fancy Exclusive Dies From Memory Box by Margie Higuchi

Use the Snowman Landscape die to cut with a piece of 5 1/2 x 3" white glitter cardstock. On the long side, place die on the top edge (making sure the snowman's head is just below the edge). Cut with manual die cutting machine. Remove die and flip the cardstock to repeat the same cutting steps.

Craft Fancy: Happy Holidays Card using Craft Fancy Exclusive Dies From Memory Box by Margie Higuchi

When done, it should look like the piece on the left. Cut in half to create two borders like the pieces on the right. For this project, we only use one but you can either set aside for another project or place inside your card for an accent.

Craft Fancy: Happy Holidays Card using Craft Fancy Exclusive Dies From Memory Box by Margie Higuchi

Placing the Pieces Together

Place your Forest Landscape border die cut about 1/2" from the bottom of your black glitter A2 size (5.5 x 4.14") card base, aligning the left edge of the border to the edge of the card base. Trim excess on the right side.

Craft Fancy: Happy Holidays Card using Craft Fancy Exclusive Dies From Memory Box by Margie Higuchi

Use your Snowman Landscape border die cut as a guide and determine the placement of sentiment stamp. Remove Snowman border, ink the stamp and stamp onto the Forest border.

Craft Fancy: Happy Holidays Card using Craft Fancy Exclusive Dies From Memory Box by Margie Higuchi

Craft Fancy: Happy Holidays Card using Craft Fancy Exclusive Dies From Memory Box by Margie Higuchi

Next, add four 3D Foam Squares on the back of the Snowman border die cut. Place at the bottom edge of the card base and you're done!

Craft Fancy: Happy Holidays Card using Craft Fancy Exclusive Dies From Memory Box by Margie Higuchi

Here's another look at the finished card.

Craft Fancy: Happy Holidays Card using Craft Fancy Exclusive Dies From Memory Box by Margie Higuchi


  • Creative Time: less than an hour
  • Skill Level: Intermediate


Materials Needed:
Craft Fancy Exclusive Dies made by Memory Box Co.: Forest Landscape and Snowman Landscape
White Cardstock: Neenah
Black and White Glitter Paper: Best Creations
Stamp: Lawn Fawn (Plan On It: Holidays Set)
Ink: Clearsnap
Tool: MISTI (My Sweet Petunia); Platinum Die Cutting and Embossing Machine (Spellbinders® Paper Arts)
Adhesives: Scrapbook Adhesives by 3L® (E-Z Runner Grand Refillable Dispenser and 3D Foam Squares - White, Regular)




4 comments:

Verna Angerhofer said...

Awesome winter scene card.

Margie Higuchi said...

Thanks Verna for stopping by and commenting! Have a great rest of the holiday weekend :)

Celeste Goff said...

Love this glittery cool card Margie! So pretty and sparkly!

Margie Higuchi said...

Thanks, Celeste! Wanted to show that you can use two different types of white - smooth cardstock + white glitter. Hope you give it a try :) Have a great week!